Эпоксидные смолы для электроэнергетики

Эпоксидные смолы для электроэнергетики

У данного типа трансформаторов, как минимум одна обмотка залита эпоксидной смолой. Делается это при помощи литейной формы, которая находится в автоклаве, в условиях, близких к нулевому давлению. Другая обмотка также может быть залита эпоксидной смолой или, как альтернатива, пропитана полиэфирной смолой класса H с высокой степенью отвердевания.

Благодаря технологическим достижениям последних лет, трансформаторы с литой изоляцией отличаются повышенной надежностью.

 

 

Каталог продукции эпоксидных смол Spolchemie для электротехческой промышленности 

Изоляторы, втулки, распределительные устройства
Product Components Mixing Ratio (pbw) Tg, DSC °C Viscosity mPa.s Pot-life Characteristic
CHS-EPODUR 494-1667 A/ B/ C1/ D2 100/ 85/ 0,8/ 4/ 4052 100 - 115 25 000/ 45 °C; 8 000/ 60 °C 8 hours/ 60 °C Modified epoxy resin and hardener system suitable for high and medium voltage applications. “REACH free”.
CHS-EPODUR 494-1667 A/ B/ C2 100/ 85/ 0,6/ 3802 115 - 125 18000/ 45 °C; 7000/ 60 °C 1 - 2 hours/ 80 °C Modified epoxy resin and hardener system suitable for high and medium voltage applications. Higher Tg.
SADURIT 520-1787 A/ B 100/ 100 95 - 110 4 000/ 60 °C 8 hours/ 60 °C; 2 – 3 hours/ 80 °C Excellent crack resistance at low temperatures, good toughness. UL 94 HB.
CHS-EPODUR 505-1577 A/ B/ C2/ D2 100/ 80/ 0,8/ 4/ 3852 100 - 115 18000/ 45°C; 8000/ 60°C 45 min/ 80°C; 6 hours/ 60°C Modified epoxy resin and hardener system suitable for high and medium voltage applications.
Распределение / силовые трансформаторы
Product Components Mixing Ratio (pbw) Tg, DSC °C Viscosity mPa.s Pot-life Characteristic
CHS-EPODUR 520-1787 A/ B/ C1/ D1 100/ 85/ 0,5 /15/ 3702 75 - 85 5 000/ 60 °C 1 – 2 hours/ 80 °C Epoxy resin and special hardener with low tendency to crystalize. System with very good toughness.
CHS-EPODUR 531-1787 A/ B/ C1/ D1 100/ 85/ 0,5/ 10/ 3702 70 - 85 20000/ 45°C; 8500/ 60°C 1 – 2 hours/ 80 °C Modified epoxy resin and special hardener with low tendency to crystalize. System with very good toughness and higher degree of filling.
CHS-EPODUR 464-1657 A/ B 100/ 75/ 3892 80 - 90 20 000/ 45°C; 8500/ 60°C 1 – 2 hours/ 80 °C Modified resin and hardener system. High degree of filling. “REACH free”.
Наружное применение
Product Components Mixing Ratio (pbw) Tg, DSC °C Viscosity mPa.s Pot-life Characteristic
CHS-EPODUR 560-1987 A/ B/ C1 100/ 90/ 0,5/ 3602 90 - 100 5 000/ 60 °C 1 – 2 hours/ 80 °C Cycloaliphatic resin and modified hardener system with very good UV resistance.
Низкое напряжение, литье, энкапсуляция и потирование
Product Components Mixing Ratio (pbw) Tg, DSC °C Viscosity mPa.s Pot-life Characteristic
SADURIT 531-0522 A/B 100/ 13 100 - 110 6 000/ 25 °C 2 hours/ 25 °C (1 000 g) Room temperature cured modified resin system, long potlife. Two component with prefilled component A. Longer pot life.
SADURIT 531-0389 A/ B 100/ 10 105 - 120 7 000/ 25 °C 1.5 hours/ 25 °C (1 000 g) Room temperature cured modified resin system. Two component with prefilled component A.
Специальные литейные системы
Product Components Mixing Ratio (pbw) Tg, DSC °C Viscosity mPa.s Pot-life Characteristic
VEROPAL 520-1987 A/ B 100/ 220 95 - 110 4 000/ 25 °C; 400/ 60 °C 4 hours/ 60 °C Prefilled – 2K system with prefilled hardener. Low viscosity system.
VEROPAL 520-1988 A/ B 100/ 220 95 - 110 4 000/ 25 °C; 400/ 60 °C 4 hours/ 60 °C Prefilled – 2K system with prefilled hardener. Low viscosity system. Excellent crack resistance.
VEROPAL 520-1491 A/ B 100/ 100 0 - 25 5 000/ 60 °C 4 hours/ 60 °C Prefilled – 2K prefilled system with UL94 V0, excellent toughness and good crack resistivity.
CHS-EPODUR 520-1997  A/ B/ C3 100/ 95/ 0,5/ 3502 165 - 175 5 000/ 60 °C 4 hours/ 60 °C Epoxy resin and special hardener with high Tg.
Дополнительная продукция / ремонтный материал
Product Components Mixing Ratio (pbw) Tg, DSC °C Gel Time 10g/50g min Characteristic
VEROPAL 520-T10M  A/ B 100/ 14 85 - 100 10-20/ 5-10 Repairing epoxy system for indoor applications. Component A with common filler and component B without filler.
VEROPAL 520-T11M  A/ B 100/ 14 85 - 100 10-20/ 5-10 Repairing epoxy system for indoor applications. Component A with wollastonite filler and component B without filler.
Дополнительная продукция /фиксационно-тиксотропные системы
Product Components Mixing Ratio (pbw) Tg, DSC °C Gel Time 10g/50g min Characteristic
VEROPAL T520-T10M A/ B 100/ 28 85 - 100 10-20/ 5-10 Thixotropic epoxy system for indoor applications. Component A and B without filler.
VEROPAL 520-461T A/ B 100/ 14 85 - 100 20-30/ 10-20 Thixotropic epoxy system for indoor applications. Component A with common filler and component B without filler.
Дополнительные продукты / клеи
Product Mixing Ratio (pbw) Tg, DSC °C Shear strength (MPa) Pot-life3 min Characteristic
CHS-EPODUR 520-2608 A/B 100/ 140 70 - 80 20 - 25 20/ 50g Structural adhesive with high elongation
up to 55% and with excellent peel and shear strength.
VEROPAL QUICK 100/ 100 50 - 60 10 - 12 3/ 10g Unique quick cure two-component epoxy adhesive.
VEROPAL SUPER 100/ 100 70 - 80 20 - 24 20/ 10g Two-component epoxy structural adhesive
with high elongation up to 55% and excellent
mechanical properties – peel strength and shear strength. Prefilled.
VEROPAL 14 100/ 50 80 - 85 20 - 24 60/ 100g Epoxy thixotropic adhesive or casting systems,
cured at room temperature. System with high
strength with goodchemical resistance. Prefilled.
VEROPAL 15 100/ 100 60 - 70 20 - 24 25/ 100g Unique hybrid epoxy 2-component structural
adhesive with high elongation and excellent
mechanical properties – peel strength
and shear strength. Prefilled.
Компания "Композит" осуществляет комплексное сопровождение клиентов на всех этапах взаимодействия:
  • 01
    Подбор смолы под производственные задачи
  • 02
    Консультации химика-технолога c завода-изготовителя Spolchemie
  • 03
    Сопровождение внедрения
    новой эпоксидной системы
    на всех стадиях
  • 04
    Организация бесперебойного снабжения благодаря наличию сырья на собственных складах